Re: 8051 Development Board / 89C51 / MCS51 / 8052

In article <dao5h2$479$1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
Brian Clark <nospam@xxxxxxxxxxx> wrote:

[... trouble getting ADC to work ...]
>What ADC are you using, I've tended to interface to external ones in the
>past for simple battery monitoring etc. Only dead basic ones like 8-bit
>AD08831 that are SPI or I2C. Be interested to hear what other people are
>using - often word of mouth is how a good chip gets known.

The Cygnal micros have built in ADCs. The F120 has an 8 bitter and a 12
bitter. Currently, the 8 bitter is giving me better numbers than the 12.

--
--
kensmith@xxxxxxxxx forging knowledge

.

Relevant Pages

  • Re: Generating a negated clock
    ... I interfaced my DSP code with base code of the board (an ADC board). ... Xilinx core because the fifo's depth is about 12000, ... In any case I doubt there's much value in their ADC interface code. ... At the end they use Xilinx Fifo core to build the large one, ...
    (comp.arch.fpga)
  • Re: MATLAB/Simulink + RTW and generating code for a microcontroller
    ... run on a microcontroller (any microcontroller, not only those TI chips on ... It should be able to read some data from a ADC, ... I have no idea how to interface to ADC and DAC. ...
    (comp.arch.embedded)
  • MATLAB/Simulink + RTW and generating code for a microcontroller
    ... I want to convert a Simulink model with one input and one output to a C program that I could run on a microcontroller. ... It should be able to read some data from a ADC, do some processing and send the result to a DAC. ... I have no problem generating the "middle part", i.e. processing, but I have no idea how to interface to ADC and DAC. ...
    (comp.arch.embedded)
  • Re: PC based DIY Oscilloscopes, logical analyzers, spectrum analyzers, etc...
    ... the heart of all those would simply be an ADC? ... I'm not sure about which interface to use though. ... Consider if you want storage or realtime. ...
    (sci.electronics.design)
  • Re: ADC implementation on fpga? Information and procudures wanted.
    ... >Hopefully the interfacing to an external adc is not too complicated. ... >then acquire the value to the fpga for further processing. ... package size, cost, and complexity of the digital interface. ...
    (comp.arch.fpga)