Need VCO for 14 MHz PLL
- From: "W Letendre" <wjlservo@xxxxxxxxxxxxxxxx>
- Date: 17 Jul 2005 10:46:17 -0700
Need to generate in phase and quadrature digital signals, locked to
laser detector output at ~ 3.6 MHz (quite stable). Need reasonably high
precision 90deg shift and 50% duty fator +/- a percent or so. Thought
of building 4X multiplying PLL, followed by 2 bit quadrature divider.
So, looking for VCO that will run at 14.4 MHz.
Seem to find lots of chips for cell phone and other VHF/UHF/uWave apps,
and old standbys from 556 and 4046 family, but nothing that would work
at 14.4 MHz. Suppose I could make a Colpitts or Hartley circuit using
varactor diode for variable capacitance, but, hoping there is a chip
that will do this. Checked Maxim, National, Motorola, Linear
Technologies, Burr Brown, with no joy. Any other suggestions?
Thanks
W Letendre
.
- Follow-Ups:
- Re: Need VCO for 14 MHz PLL
- From: Tim Shoppa
- Re: Need VCO for 14 MHz PLL
- From: Rene Tschaggelar
- Re: Need VCO for 14 MHz PLL
- From: john jardine
- Re: Need VCO for 14 MHz PLL
- From: Tim Wescott
- Re: Need VCO for 14 MHz PLL
- From: John Fields
- Re: Need VCO for 14 MHz PLL
- From: John Larkin
- Re: Need VCO for 14 MHz PLL
- From: Joerg
- Re: Need VCO for 14 MHz PLL
- Prev by Date: Re: How come its OK to mix impedances in a radio system??
- Next by Date: Re: op amp-based effects loop circuit for guitar amplifier
- Previous by thread: op amp-based effects loop circuit for guitar amplifier
- Next by thread: Re: Need VCO for 14 MHz PLL
- Index(es):
Relevant Pages
|