Re: Where to find LCM / system design info?

Hello Lewin,

All these COB micros are available as ROMless bodies either in standard
IC packaging or on small demo boards (typically 1"x1") bonded out and
ready to use. If he establishes the contacts to buy the chips, he will
have access to the prototyping boards.

I meant LCD drivers such as the ones from Sunplus. Probably you can have them packaged somewhere though.

Regards, Joerg

http://www.analogconsultants.com
.

Relevant Pages

  • Re: looking for class D amplifier
    ... I prefer to design in parts from manufacturers where it's less likely ... designer would see chips that do not yield at the target. ... The person running packaging might not order leadframes for the ... secret that the people off-shore really don't know a whole lot. ...
    (sci.electronics.design)
  • Re: SID chip fraud(!)
    ... Kevin Horton bought a few, and found that they were all bad. ... He noticed that there was something fishy about the chip packaging - ... I collect MOS chips - actually I used to, ... You have to be careful with acetone, because, as you can see, you almost end ...
    (comp.sys.cbm)
  • Re: Help Identifying three ICs
    ... the packaging to expose the silicon chips. ... logo and the standard catalog part number easily readable somewhere ...
    (sci.electronics.basics)
  • Re: Help Identifying three ICs
    ... the packaging to expose the silicon chips. ...
    (sci.electronics.basics)
  • Re: Max size limit on MicroDIMM memory modules?
    ... generally used in subnotebooks ... Sorry but I've never messed with sub-notebooks. ... the packaging and chips to allow this form factor at that size was at the ...
    (comp.sys.ibm.pc.hardware.chips)