Re: Please suggest a time delay toggle switch





Fred Bloggs wrote:


mingyan_chow@xxxxxxxxxxxx wrote:
 > Absolutely correct. One button selection is really limited. However,
 > this application is only for my turntable. I can get used to it. i.e.
 > press the button to "On" 33. Press again, "Off". While play 33 want to
 > switch to 45. Turn it off, then press the button long enough to toggle
 > 45 oscillator.

So the OFF-to-ON requires a five second button press, and the ON-to-OFF
does not, and successive OFF-to-ON's toggle the speed selection.

 > I think I got a workable circuit on my bread board now. Question, how
 > to feed two oscillator output to op-amp circuit.
 > The existing circuit has a 22K resistor connected to 4013 clock output
 > pin 12 (pin 12 connected with pin 5), 22 K is then connected with 5K VR
 > to set level. and other end of 5KVR connected with a 22U cap. to
 > ground. Output of 5K VR connect to LM324 via a 56K resistor.
 > Since I duplicated the same oscillator, can two oscillator ouput
 > connect to the same op amp input?
 >

Your description is ambiguous, it could mean anything, but any one of
the various opamp summer configurations will serve this purpose. You
state elsewhere that the ultimate output should be a 1Vpp. It would help
if you told us what power supplies and DC levels this circuit uses.
        View in a fixed-width font such as Courier.

.
.
.                                              12V
.                                               |
.                                               |
.                                               |
.      12V _   _                              |\|
.         | | | |     CLOCK1>--[22K]-+--------|+\
.        -   -   -                   |        |  >-+--+-->
.      0V             CLOCK2>--[22K]-+      +-|-/  |  |
.                                    |_     | |/|  |  |
.                                    |/|    |   |  |  |
.                     ADJ 2.2K -->  [5K]    +------+ [1K]
.                                   /|          |     |
.                                    |          |     |
.                                    +----------+-----+
.                                               |
.                                              ---
.                                              GND
.

If you want just a single time delay then this works, the ON/OFF FF1 toggles 3.5 seconds after pressing the button, and the speed select FF2 toggles when the ON/OFF FF1 transitions from ON->OFF:
View in a fixed-width font such as Courier.



. . . . +-----------+------------------------------> OFF TO . | FF1 | FF2 4066 RSTs . | ON/OFF | <-CD4013-> 33/45 . | | +-----------+ . | ----- | 1=OFF | ----- | . | | | | 0=ON | | | | . +--|D Q| | +-|D Q|---|-----> 33RPM . | | | | | | 4066 . | _| | | _| | RSTs . +-->CK Q|--+-------------->CK Q|---+-----> 45RPM . | | | | | . | | R/S | | R/S | . | ----- ----- . | | | . | - - . | GND GND . | . | . | . +-----------------------------------+ . | . Vdd | . | | . | | . +-----+ HEF4538B | . | | | . | | ---OS1--- | . |o | |__ | | . -| +------|I0 | | . |o | | Q| | 3 SECS . | | | | | - - . +------------|I1 | | | | . | | | _| | ____ . [10K] | | Q|--+ . | | |__ | . GND +------|CD | . | | | . [1M] | | . +------|RT CT|-+ . | | | | . | --------- | . | + | . +---------||-------+ . 3.3U TANTALUM . . . . DIODE OR OUTPUT TO 4066 RSTs AS INDICATED . . . . . Q,FF1 --|>|--+->33RPM RST Q,FF1 --|>|--+->45RPM RST . | 4066 | 4066 . | _ | . Q,FF2 --|>|--+ Q,FF2 --|>|--+ . | | . [10K] [10K] . | | . GND GND .

You want the button to still be held or transition is disallowed- so that dual one-shot circuit must be modified like so:
View in a fixed-width font such as Courier.



.. .. .. .. +-----------+------------------------------> OFF TO .. | FF1 | FF2 4066 RSTs .. | ON/OFF | <-CD4013-> 33/45 .. | | +-----------+ .. | ----- | 1=OFF | ----- | .. | | | | 0=ON | | | | .. +--|D Q| | +-|D Q|---|-----> 33RPM .. | | | | | | 4066 .. | _| | | _| | RSTs .. +-->CK Q|--+-------------->CK Q|---+-----> 45RPM .. | | | | | .. | | R/S | | R/S | .. | ----- ----- .. | | | .. | - - .. | GND 100MS GND .. | - - .. | | | .. | _ .. +---------------------------------------------------+ .. Vdd | .. | | .. +-------+--------------------------------+ | .. | | | | .. | +---|--------------------+ | | .. | | | | | | .. | | | ---OS1--- | | ---OS2--- | .. |o | | |__ | | | |__ | | .. -| | +------|I0 Q|----------------------|I0 | | .. |o | | | | | | | Q| | .. | | | | _| | | | | | .. +---+----------|I1 Q| | +----|------|I1 | | .. | | | | | | | | _| | .. | | | | | | | | Q|-+ .. | | |__ | | | | |__ | .. | +------|CD | +-----------|------|CD | .. | | | | | | | | .. [10K] [1M] | | | 1M] | | .. | +------|RT CT|-+ | +------|RT CT|-+ .. | | | | | | | | | | .. | | --------- | | | --------- | .. | | + | | | | .. | +---------||-------+ | +---------||-------+ .. | 3.3U TANTALUM | 0.1U .. +-----------------------------------+ .. | .. GND <- HEF4538B -> .. .. .. DIODE OR OUTPUT TO 4066 RSTs AS INDICATED .. .. .. Q,FF1 --|>|--+->33RPM RST Q,FF1 --|>|--+->45RPM RST .. | 4066 | 4066 .. | _ | .. Q,FF2 --|>|--+ Q,FF2 --|>|--+ .. | | .. [10K] [10K] .. | | .. GND GND .. .. .. .. .. .. .. .. ..



.


Quantcast