Re: HELP With Step-Down Transformer and Converter
- From: "gene" <winapps2@xxxxxxxxxxxxxxx>
- Date: 17 Sep 2005 12:43:22 -0700
Dear Phil,
Thanks for the tip on the Spot Welding... I will try it.
I tried using the coils from a soldering gun but I don't seem to
generate a high current... just heat.
I still need the DC-DC converter.
I know I can't have 100% efficiency ... 50% to 80% is ok.
I tried making a primary coil (lots of windings and finer wire) and a
secondary coil (fewer windings and thick copper wire) but I can't seem
to induce a high current/low voltage on the secondary wire. I know I'm
missing something ... like an interruptor perhaps?
Can you help me with the DC-DC Step down converter.
Thanks.
Gene
.
- Follow-Ups:
- Re: HELP With Step-Down Transformer and Converter
- From: The Phantom
- Re: HELP With Step-Down Transformer and Converter
- References:
- HELP With Step-Down Transformer and Converter
- From: gene
- Re: HELP With Step-Down Transformer and Converter
- From: Phil Allison
- HELP With Step-Down Transformer and Converter
- Prev by Date: Re: Need help with typical relay circuit
- Next by Date: Re: RF: Working a smith chart without a compass?
- Previous by thread: Re: HELP With Step-Down Transformer and Converter
- Next by thread: Re: HELP With Step-Down Transformer and Converter
- Index(es):
Relevant Pages
|
Loading