Re: Help! Needing hint on Microcontroller
- From: John Larkin <jjlarkin@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sun, 18 Sep 2005 14:33:00 -0700
On Sun, 18 Sep 2005 23:09:01 +0200, Ruediger
<ruediger.leibrandt@xxxxxx> wrote:
>Hello all!
>
>Due to the costs and size of multichannel I/O RC-model Transmitters &
>Receivers I want to design a Bluetooth using, microcontroller based remote
>control.
>The pcb's in the receiver and the transmitter shall be equal, as there is a
>lot of data to be picked up and put out on both sides, as the vehicle has
>compass and tilt sensor, battery monitor and similar equipment, and the
>transmitter has to display these info's on both analoguous and digital
>displays.
>
>What I am still thinking about is the main microcontroller on both sides -
>ideally it's a µC with a USB-Interface to make use of a cheap
>USB-Bluetooth-module, I would need about 8 output ports to act as
>servo-data lines, 4 to 8 digital inputs and at least 4 analog inputs.
>Furthermore the controller needs to be in-system programmable and ideally
>programmable with some higher-level language such as C or C++ or even Java.
>
>Any ideas anyone? Input warmly welcome!
Are you suggesting Bluetooth as the ground-to-plane link? BT is only
good for a few feet.
John
.
- Follow-Ups:
- Re: Help! Needing hint on Microcontroller
- From: Pooh Bear
- Re: Help! Needing hint on Microcontroller
- References:
- Help! Needing hint on Microcontroller
- From: Ruediger
- Help! Needing hint on Microcontroller
- Prev by Date: Skype VoIP.sci.electronics.design.disaster?
- Next by Date: Re: USA's Engineering blues
- Previous by thread: Re: Help! Needing hint on Microcontroller
- Next by thread: Re: Help! Needing hint on Microcontroller
- Index(es):
Relevant Pages
|
