Re: Help! Needing hint on Microcontroller


John Larkin wrote:

> On Sun, 18 Sep 2005 23:09:01 +0200, Ruediger
> <ruediger.leibrandt@xxxxxx> wrote:
>
> >Hello all!
> >
> >Due to the costs and size of multichannel I/O RC-model Transmitters &
> >Receivers I want to design a Bluetooth using, microcontroller based remote
> >control.
> >The pcb's in the receiver and the transmitter shall be equal, as there is a
> >lot of data to be picked up and put out on both sides, as the vehicle has
> >compass and tilt sensor, battery monitor and similar equipment, and the
> >transmitter has to display these info's on both analoguous and digital
> >displays.
> >
> >What I am still thinking about is the main microcontroller on both sides -
> >ideally it's a µC with a USB-Interface to make use of a cheap
> >USB-Bluetooth-module, I would need about 8 output ports to act as
> >servo-data lines, 4 to 8 digital inputs and at least 4 analog inputs.
> >Furthermore the controller needs to be in-system programmable and ideally
> >programmable with some higher-level language such as C or C++ or even Java.
> >
> >Any ideas anyone? Input warmly welcome!
>
> Are you suggesting Bluetooth as the ground-to-plane link? BT is only
> good for a few feet.
>
> John

I thought so too. The model will be out of control range in no time at all.

Graham


.

Relevant Pages

  • Re: Help! Needing hint on Microcontroller
    ... > John Larkin wrote: ... >>>Receivers I want to design a Bluetooth using, microcontroller based ... be enough for a ground vehicle. ...
    (sci.electronics.design)
  • Re: Help! Needing hint on Microcontroller
    ... > John Larkin wrote: ... >>>Receivers I want to design a Bluetooth using, microcontroller based ... A 1.08 Mile Bluetooth range. ...
    (sci.electronics.design)
  • Re: Help! Needing hint on Microcontroller
    ... Receivers I want to design a Bluetooth using, ... control. ... transmitter has to display these info's on both analoguous and digital ... How will you be communicating with the Bluetooth module without the windows driver? ...
    (sci.electronics.design)
  • Re: Help! Needing hint on Microcontroller
    ... >Receivers I want to design a Bluetooth using, microcontroller based remote ... >control. ... >transmitter has to display these info's on both analoguous and digital ... Are you suggesting Bluetooth as the ground-to-plane link? ...
    (sci.electronics.design)
  • Re: One Bluetooth, two PDAs ?
    ... two Bluetooth "receivers" (the PDAs) and the sender will not communicate with both PDAs simultaneously? ... I thought a Bluetooth "piconet" allowed duplex communication amongst multiple devices. ...
    (sci.geo.satellite-nav)
Loading