Re: operational amplifier
Augast15 wrote:
I am working on amplifier with requirement of fixed gain 1.5 at
frequency 5-15 KHz. I am not able to find a suitable circuit. any
help...
You need to look way at the _front_ of your op-amp book. If you don't
have one and you're in the US go to Rat Shack and see if they have an
"Engineer's Mini-Notebook" on operational amplifiers.
--
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
.
Relevant Pages
- Re: FM demodulation problem
... I forgot a capacitor on my DAC ouput, so the low frequency don't pass ... Now it work fine from 1 Hz to 250 kHz with no problem ... Wescott Design Services ...
(comp.dsp) - Re: Approach to demodulating AM-signals?
... I need to sample and demodulate an AM-signal that is between 30 kHz to 100 ... How high sampling frequency should I use? ... Wescott Design Services ...
(comp.dsp) - Re: Receive NDB beacons ?
... > Tim Wescott ... > Wescott Design Services ... frequency to be a multiple of 9 KHz (The EU channel spacing) to make it ... Seems that 450 would work with both 9 and 10 KHz ...
(sci.electronics.design) - Re: How to make a sharp anti-alias LP-filter?
... should be 110 kHz and it should ideally attenuate 98 dB at 250 kHz. ... The A/D-converter is a 12-bit SAR converter with a sampling frequency ... passive L/C filter? ... Wescott Design Services ...
(sci.electronics.design) |
|
