Voltage ratings of SM resistors

A 1206 is rated at 200V and an 0805 is rated at 150V.
Under low power conditions (say 2mW for a 10meg resistor), what is the maximum voltage they can handle without a large reduction in reliability?
How about at 150C, which is less than the manufacturer max of 175C?
.

Relevant Pages

  • Re: Voltage ratings of SM resistors
    ... >the maximum voltage they can handle without a large reduction in ... which is less than the manufacturer max of 175C? ...
    (sci.electronics.design)
  • Re: Mill Hill East
    ... Why don't they genuinely improve reliability by ... reduction in service frequency. ... John Band ... use the Watford Junc to Broad St and Watford to Croxley ...
    (uk.transport.london)
  • Re: Mill Hill East
    ... Why don't they genuinely improve reliability by ... reduction in service frequency. ... If the result is to make a substantial reduction in total Misery Line ... John Band ...
    (uk.transport.london)
  • Re: "Reverse engineering" burnt resistors
    ... If you know the maximum voltage likely to have fell across a resistor in ... Say for a 1/3 watt metal oxide resistor ... schematics/manuals list on ... starting from a table of wattages and likely to result in those sorts of ...
    (sci.electronics.repair)
  • Re: resistor values--wattage and tolerance
    ... "non-ideal" properties of a resistor are involved. ... the inductance of the resistor (which is normally ... and I can imagine designing a circuit that performs differently ... for a maximum voltage, but they don't work very well if the actual voltage ...
    (rec.audio.tech)
Quantcast