need inverter: 24V to 115AC three phase, 100W

I need to build an inverter to convert 24V to 115V AC, three phase. The
load is a gyro, which is a motor, so I suppose its inductive. I dont
know if this means it needs to be a pure sine wave output or if it
makes it able to handle a square wave output or a sine wave with
harmonics. Anyone know what a simple way to make one of these might be?
Or an off the shelf unit?

.

Relevant Pages

  • Re: need 24V to 115VAC 3 phase inverter for gyro
    ... > sine wave is for this kind of equipment? ... Running a motor, such as on a gyro, is the least critical place for a sine ...
    (rec.aviation.homebuilt)
  • Re: Induction motor design for PWM
    ... >My project is to make a three phase AC induction motor that will be powered ... >from batteries by means of a PWM sine wave inverter. ... >I want to wind a motor with 6 poles on a 36 hole stator, ... >How much effect does the number of slots on the rotor vs that of the ...
    (sci.electronics.design)
  • Re: Inexpensive UPS gotchas with older equipment
    ... > running through power failures; trying it on the VAX was just a hope ... > output, not true sine wave, though the specs don't specify the level ... > as full time units would be, but most of those are more expensive ... > units that provide true sine wave output. ...
    (comp.os.vms)
  • Re: Inexpensive UPS gotchas with older equipment
    ... but you're correct about the power ... used to approximate a sine wave; ... full time units would be, but most of those are more expensive units ... that provide true sine wave output. ...
    (comp.os.vms)
  • FFT analysis : how to?
    ... I'd like to make a fft and harmonics analysis on a synthesizer's sine wave ... vco, given that the wave output is not pure and features some extra ...
    (sci.electronics.components)