Re: Can anyone explain this IC for me?

MRW wrote:

Hi all,

I am looking at the TDA1083 IC. The datasheet shows the following
image:
http://img120.imageshack.us/img120/2720/tda1083blockdiagram1sr.jpg

I'm trying to figure out where the input for the FM signal goes. This
IC is supposed to be an AM/FM receiver, but this newbie is a bit
clueless as to where the FM antenna and matching network should be
connected.

Any tips?

Thanks!

Please go to wikipedia and look up the difference between "cross posting" and "multiple posting". Only one is considered to be good style, and then only under some circumstances.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
.

Relevant Pages

  • Re: TDA1083 IC, I need help.
    ... MRW wrote: ... The datasheet shows the following ... If you can find a data sheet there should be a sample circuit, ... Wescott Design Services ...
    (rec.radio.amateur.antenna)
  • Re: How do I scale a 9-b signed 2s complement data by 17/sqrt(21)?
    ... best precision possible. ... Without considering clipping and range issues, ... Then stop multiple posting. ... Wescott Design Services ...
    (comp.dsp)
  • Re: Ming RX Rx module: output all over without signal, Is this normal ?
    ... >> Here is the datasheet for the module. ... > to you data when it shows that the thing's receiving a carrier. ... > Wescott Design Services ...
    (sci.electronics.design)
  • Re: quadrature detector & SSB
    ... It is capable of demudulating many types of modulation. ... But datasheet says nothing more exept "it is possible to detect ssb with ad607" ... Wescott Design Services ...
    (rec.radio.amateur.homebrew)
  • Re: Control Loop Stability and Sampling
    ... You have done something called "multiple posting". ... All newsreaders are different in this regard, and Google Groups is, well, lame. ... I _think_ that all you need to do is put both newsgroups in the 'to' line, but the link below should tell you how to cross post from Google. ... Wescott Design Services ...
    (comp.dsp)