Re: M/S connector pin extractor?

"George" <_g_bnotreallymyaddresseccles@xxxxxxxxxxx> wrote in message
news:v21io1dhpd2ohkjip3e50h32omjjsrjcsc@xxxxxxxxxx
> On Sat, 26 Nov 2005 18:34:12 -0600, John Fields
> <jfields@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
>>On Sat, 26 Nov 2005 20:44:44 GMT, George
>><_g_bnotreallymyaddresseccles@xxxxxxxxxxx> wrote:
>>
>>>I have to change a pin in a metal-shell circular connector. So, I'm
>>>looking for a hand extraction (/insertion) tool. The identifying
>>>number for the connector may be 'MS 3116 22-55'.
>>
>>---
>>If you can positively identify the connector (instead of "The
>>identifying number for the connector may be ...)
>>
>>I'll provide you with the nomenclature for the tool and, if you
>>like, sell you one.
>
> The only number(s) I find on the connector I have are stamped in the
> locking ring: 7815 KPTM06B22-558. I don't see any vendor ID. The 'MS
> 3116' number came from a spec for the equipment that this mates to, as
> in "Connector shall intermate with MS 3116 ..."
>
> George


The KPT series connectors are ITT Cannon products. Download the spec from
their web site at http://www.ittcannon.com/media/pdf/catalogs/KPT_KPSE.pdf.
It should contain just about all the info you need to buy the connectors,
pins and sockets, crimping and insertion/removal tooling.
There are cross references on the web for tooling from various
manufacturers. Daniels Manufacturing is a well known source for mil-spec
connector tooling.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in
the address)

Never take a laxative and a sleeping pill at the same time!!


.

Relevant Pages

  • Re: M/S connector pin extractor?
    ... >> The only numberI find on the connector I have are stamped in the ... Download the spec from ... >pins and sockets, crimping and insertion/removal tooling. ... Daniels Manufacturing is a well known source for mil-spec ...
    (sci.electronics.design)
  • Re: Why dont camera reviews cover the data connection to the PC?
    ... downloaded it and the manual and the web site call the port a USB/AV port. ... Yes, I'd responded, before reading your message, concerning the manual. ... NOTHING about what the connector was. ...
    (rec.photo.digital)
  • Re: Why dont camera reviews cover the data connection to the PC?
    ... downloaded it and the manual and the web site call the port a USB/AV port. ... reading the manual wouldn't have helped me just as reading the ... NOTHING about what the connector was. ...
    (rec.photo.digital)
  • Re: Grrrrrrr
    ... >>The AMP web site is absolutely, totally, stupidly useless. ... > Samtec is the only connector company that want to sell you connectors. ...
    (sci.electronics.design)
  • Re: Tech: Transformer connector part number
    ... Joseph "Tony" Dziedzic ... This is the connector on ... >the web site for Molex, I can not find this connector anywhere. ...
    (rec.games.pinball)