Re: WHAT'S THE CALUE OF THIS CAP? - cap.jpg (0/1)


"Terry" <katamasouth@xxxxxxxxxxx> wrote in message
news:438e1899.29278188@xxxxxxxxxxxxxxxxxxxx
>
> I did a boo-boo and managed to fry (ooo, what a stink) a brand new
> remote switch for our xmas lights. As you can see from the attachment,
> it is definitely a dead cap (the smell was from a resistor on the same
> board).
>
> My question is, what's the value of the cap? I am guessing .00022 uF
> at 250V. I have a pretty good junque box, but don't want to kill this
> little gadget for sure with the wrong value.
>
> It's a 300-MHx 2-ch receiver driving two relays that switch two load
> circuits (lights).
>
> At least there are two good relays to salvage!
>
> TIA--
> Terry--WB4FXD
> Edenton, NC


The glare is on it, but assuming I read it correctly it says 225J and 250 on
it. This would strongly imply 2.2uF 5% 250V rated polyester.


.

Relevant Pages

  • Re: WHATS THE CALUE OF THIS CAP? - cap.jpg (0/1)
    ... > remote switch for our xmas lights. ... > it is definitely a dead cap (the smell was from a resistor on the same ... > It's a 300-MHx 2-ch receiver driving two relays that switch two load ...
    (sci.electronics.design)
  • WHATS THE CALUE OF THIS CAP? - cap.jpg (0/1)
    ... remote switch for our xmas lights. ... it is definitely a dead cap (the smell was from a resistor on the same ... It's a 300-MHx 2-ch receiver driving two relays that switch two load ...
    (sci.electronics.design)
  • Re: WHATS THE CALUE OF THIS CAP? - cap.jpg (0/1)
    ... >> I did a boo-boo and managed to fry a brand new ... >> remote switch for our xmas lights. ... >> it is definitely a dead cap (the smell was from a resistor on the same ...
    (sci.electronics.design)