Re: Very cheap molded enclosures?
- From: "Frank Bemelman" <f.bemelmanq@xxxxxxxxxxxxxxxxx>
- Date: Wed, 14 Dec 2005 22:02:06 +0100
"Joerg" <notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:wxZnf.40021$D13.30667@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I strongly believe there is a market and that many products never come
> to fruition because the enclosure costs are breaking the deal. So there
> should be a healthy market. I really don't know why box mfgs don't offer
> boxes with some standard size holes in them for switches, potmeters,
> LEDs. Then they could offer plugs for those holes that you don't want
> and it should be the often cited win-win situation.
That's a daft idea. The holes would always be in the wrong place, or
even worse, slightly misplaced. The plugs would cost 2 cents which you
find too expensive.
Products come to fruition because some companies have the guts to
get on with it.
If you plan to make a 10k-20k/year of these boxes, you should at least
have the guts to buy 1000 cases at *whatever* it costs to see if your
product flies. You are *making* it an impossible project, because you
want to make profit on the first box.
Did you buy a few of those cable testers? No, of course not. You're
not even prepared to buy them, rip them apart, to 'massage' your own
creativity, and to see what happens, to see if it sprouts other ideas.
You only see elephants that crush your boxes, you only see 9V batteries
that you don't like, warranty claims, stickers that were too expensive,
and what have you.
Make 1000 boxes for $15 a piece, and sell them for $5. You can save
a buck if you drill them yourself, using a steel template/rig, if
that makes you sleep better. The $10.000 loss on the first batch
is just an investment.
--
Thanks, Frank.
(remove 'q' and '.invalid' when replying by email)
.
- Follow-Ups:
- Re: Very cheap molded enclosures?
- From: Spehro Pefhany
- Re: Very cheap molded enclosures?
- From: Joerg
- Re: Very cheap molded enclosures?
- References:
- Very cheap molded enclosures?
- From: Joerg
- Re: Very cheap molded enclosures?
- From: Tim Wescott
- Re: Very cheap molded enclosures?
- From: Rich Grise
- Re: Very cheap molded enclosures?
- From: Tim Wescott
- Re: Very cheap molded enclosures?
- From: Carl Ijames
- Re: Very cheap molded enclosures?
- From: Joerg
- Re: Very cheap molded enclosures?
- From: Carl Ijames
- Re: Very cheap molded enclosures?
- From: Joerg
- Very cheap molded enclosures?
- Prev by Date: Re: Audio Spectrum analyzer help
- Next by Date: Re: Ha. Low end ethernet routers
- Previous by thread: Re: Very cheap molded enclosures?
- Next by thread: Re: Very cheap molded enclosures?
- Index(es):
Relevant Pages
|