Re: seriously dumb question 'bout Tek scopes...

On Mon, 26 Dec 2005 00:25:00 +0100, Paul Burridge
<pb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

>>>Hi all,
>>>
>>>I recently bought a 4-channel Tek 350Mhz scope which purportedly has 2
>>>50 ohm inputs. But I can only find 4 high-Z inputs (the usual 1M ||
>>>15pF) according to the front panel. How do I switch to 50 ohms -
>>>assuming I can at all? Or have I been shafted??
>>
>>---
>>If you got a 2245, look under, and a little to the right of, the two
>>"VOLTS/DIV" rotary switches on the front panel and you'll find two
>>pushbutton switches. Push the bottom one until the legend to its
>>left reads "50 ohms DC".
>
>Okay, thanks chaps! Got it.
>
>--
>
>"What is now proved was once only imagin'd" - William Blake


Hello Paul,
which model/type number did you buy?
Just interested.

The yahoo Tekscope group is very good
for help with repairs.
http://groups.yahoo.com/group/TekScopes/

People there are well mannered, no slagging
or politics on that group like there is on this one. :-)
Just Tekscopes nothing else.

Regards,
John Crighton
Sydney

.