Re: 1-32 Khz in 1khz divisions
- From: Fred Bloggs <nospam@xxxxxxxxxx>
- Date: Tue, 27 Dec 2005 16:53:31 GMT
Jim Thompson wrote:
On Tue, 27 Dec 2005 08:03:41 -0700, Jim Thompson <To-Email-Use-The-Envelope-Icon@xxxxxxxxxxxxxxx> wrote:
On Tue, 27 Dec 2005 04:32:02 GMT, Fred Bloggs <nospam@xxxxxxxxxx> wrote:
Jim Thompson wrote:
Duty Cycle Version....
http://www.analog-innovations.com/SED/DutyCycleX32Channel.pdf
...Jim Thompson
Quick! What line are you reading when the voltage is 2.273V?
The initial two clocks during reset DOES cause some heartburn.
Don't know whether it'd be worth the logic to fix the reset, or just devise a nice receiver that lights an LED.
...Jim Thompson
Just AND the clock with each of the output lines and you get 1-thru-32 pulses per cycle.
Then the receiving end can simply be a (probably BCD) counter and an LED or LCD display driver.
...Jim Thompson
That was the main drawback of my original cut at this. That makes 32 ANDs or 8-quad ICs- so something had to be done about that. After fiddling with a few ideas it dawned on my that since this will a battery operated field instrument, you can chop all the output lines with a single gate driving the reference shield:
View in a fixed-width font such as Courier.
.. .. XMTR .. PWR LMTD .. ISOLATED 32-bit SR .. LINE # .. ---------- .. .--------|RST Q0|-------[1k]---> 32 .. | | | .. | | | .. | '1'-|D Q1|-------[1k]---> 31 .. | | | .. _ _ | | | .. _| |_| |_-------+--->CLK | . .. | | | | . .. 1KHz | | | | . .. | | | | .. | | | | .. | | | | .. | | | Q31|---+---[1k]---> 1 .. | | ---------- | .. | | | .. | | | |\ .. | '---------------+--|---| o----> SHIELD .. ------------------- __ | | |/ .. | Q | / |----' | .. | B |----< | | .. | CD4538 | \__|-------' .. | | .. ------------------- .. 3ms ONE-SHOT .. .. .. -------------- .. | __ __ | .. | | | | | | .. | -- -- | .. | | | | | | .. RCVR | -- -- | .. ------------- .. | .. / 14 .. CD4093 | ..LINE __ __ -------------------- .. >-|>|-+--[33K]--+----| \ | \ | | .. | | | o--| o-->CU CD40110 | .. [3.3K] | .-|__/ |__/ | | .. | | | | | .. | | | | LATCH RST | .. --- | | -------------------- .. com | | _ _ | | .. | | | | [100K] _|_ .. | | | | .. | | '--------. +---. .. | | | | | ..SHIELD | +------[100K]-------+----+-----||-' [10K] .. >----. | | | | | 100p | .. | | === | | | --- .. | | | 470p | | | com .. --- | --- | | | .. com | com | | | .. | __ ------------------- .. | | \ | Qa Bb /Qb | .. +-----------| o---|Ba | .. | |__/ | CD4538 | .. === | | .. 470p ------------------- .. | 1,5ms retriggerable .. --- .. com .. .. ..
.
- Follow-Ups:
- Re: 1-32 Khz in 1khz divisions
- From: Jim Thompson
- Re: 1-32 Khz in 1khz divisions
- References:
- 1-32 Khz in 1khz divisions
- From: Barry S .
- Re: 1-32 Khz in 1khz divisions
- From: Jim Thompson
- Re: 1-32 Khz in 1khz divisions
- From: Fred Bloggs
- Re: 1-32 Khz in 1khz divisions
- From: Jim Thompson
- Re: 1-32 Khz in 1khz divisions
- From: Jim Thompson
- 1-32 Khz in 1khz divisions
- Prev by Date: Re: Compressing Voice Sound.
- Next by Date: Re: High current voltage regulator
- Previous by thread: Re: 1-32 Khz in 1khz divisions
- Next by thread: Re: 1-32 Khz in 1khz divisions
- Index(es):
Relevant Pages
|