Re: Switch debouncing
- From: "Jon" <jon.lark@xxxxxxxxxx>
- Date: 28 Dec 2005 07:25:19 -0800
If you can use a SPDT momentary switch, here's an easy way to debounce:
Connect 2 2-input NAND gates in a latch configuration (Output of gate
A to one input of gate B; Output of gate B to one input of Gate A.
Connect the two "fixed" switch terminals to the two remaining gate
inputs. Connect the "swinger" of the switch to ground. This circuit
will de-bounce for an indefinite bounce period. The only restriction
is that the switch "swinger" can not bounce between the other 2
contacts. This should not be a problem. I've never seen a SPDT swith
(or relay) that does this.
.
- Follow-Ups:
- Re: Switch debouncing
- From: Abstract Dissonance
- Re: Switch debouncing
- References:
- Switch debouncing
- From: Abstract Dissonance
- Switch debouncing
- Prev by Date: Re: ASCII editor
- Next by Date: Re: Ho ho ho, Merry...
- Previous by thread: Re: Switch debouncing
- Next by thread: Re: Switch debouncing
- Index(es):
Relevant Pages
|