Re: Ripple filter
- From: ehsjr <ehsjr@xxxxxxxxxxxxxxxx>
- Date: Sat, 14 Jan 2006 05:20:19 GMT
John Doe wrote:
"John Fields" <jfields@xxxxxxxxxxxxxxxxxxxxx> wrote in message news:3kqfs1pvm205424lkc8osb1a1o9bbr8baf@xxxxxxxxxx ##snip ##
After all is said and done, I'd put a 2000µF/25V aluminum electrolytic in there and be done with it.
-- John Fields Professional Circuit Designer
THANKS for all replies!
John I agree that that would be the easiest thing to try so will look for a
large electrolytic capacitor and let you all know how it works. Thanks for
doing the math- I was way off with my .1mfd. If that don't work will look
look into the regulators mentioned.
Just use John's design, as he designed it. If you use a filter cap and nothing else, the fan will still be exposed to too much voltage.
Ed
Do they still make germanium
transistors (low voltage drop)? I looked for them once -not too hard- and all I could find was antiques.
I wasn't too clear on the ripple source. The charger for the RV -called a converter- has 2 outputs, one for battery, the other powers the fuse bus for the RV accessories. I think they do this so charge rate won't be affected by accessory load. So I guess the battery might filter it's output but the fuse bus is not- wish I had a scope.
.
- References:
- Ripple filter
- From: John Doe
- Re: Ripple filter
- From: John Fields
- Re: Ripple filter
- From: John Fields
- Re: Ripple filter
- From: John Doe
- Ripple filter
- Prev by Date: Re: Opamp Audio question
- Next by Date: Re: Win's next 10kV project, a 1us ramp
- Previous by thread: Re: Ripple filter
- Next by thread: Re: Ripple filter
- Index(es):
Relevant Pages
|