small signal NPN transitor for muting microphone



I have posted a circuit at this address, please have a look.
http://www.psv.co.uk/MicMute.JPG

What I am trying to do is, mute the microphone by using the transistor as
explained in the circuit. I can un-mute it by closing the switch. All this
works fine on one unit I have modified. I need to modify about 200 units.

My question is, can you see any problem with the circuit?
BTW new parts I will be adding, are:
one 4.7K register, one Transistor, one diode and a switch.


.



Relevant Pages

  • Re: Joule Thief - still not working....
    ... The circuit is this: http://www.artlum.com/jt/joulethief.gif ... I also tried a honking big "high speed switching" transistor pulled ... Are the saturation of cores more predictable than BJT beta -- keeping ... Assuming fixed battery voltage and fixed winding ratio of the ...
    (sci.electronics.basics)
  • Re: small signal NPN transitor for muting microphone
    ... Actually the switch is part of the microphone. ... >>> I have now uploaded second image to explain why I need diode. ... > muting circuit. ...
    (sci.electronics.design)
  • Re: Ground loops and TTL supply from PSU questions
    ... will use that ground as a reference for a voltage coming off ... transistor from a 4013 flip/flop, and connect the 2V coming from the AGP ... the transistor would complete the circuit ... I'm thinking I would have to use a quad bilateral switch. ...
    (sci.electronics.design)
  • Re: doubling up on a coil transistor?
    ... IMHO The fuse for these circuits may have been selected because ... shorter than the surge specs of the Transistor. ... DC resistance of the coil. ... added into the circuit, even a few ohms, after 5 LR time constants the ...
    (rec.games.pinball)
  • Re: Joule Thief - still not working....
    ... The circuit is this: http://www.artlum.com/jt/joulethief.gif ... I also tried a honking big "high speed switching" transistor pulled ... it does depend on saturation of the core. ... The classic tube "blocking oscillator" had its ON time determined by ...
    (sci.electronics.basics)

Loading