Re: Power Supply Design

Ok alot of people have asked for more details so here they go.

I have access to both US mains power (115 VAC RMS @ 60HZ) and a 13.8
VDC benchtop supply. The caps are 3,700uf at 350v rated 400 surge
(currently there is a bank of 6 of them in parallel). I was hoping to
charge them up to between 300-330v. I have been using a disposable
camera board to charge up only a single one to 300v and that takes
about 5-10 minutes. (The caps are electrolytic type and I know they
are not suited at all for a pulse discharge but thats what they will be
used for as they came to me free).

.

Relevant Pages