Re: TL082 opamp input range?


D. G. wrote:

Working with 9V supply. The signal is normally biased at 4.5V but can go
lower by design to shift the DC level at output. I just checked with a LM358
(got one in my stock :)
According to data***, slew rate is about 0.2V/uS. A 50KHz cycle is only
20uS so I feared it was too slow and... it is.
The wave form looks more like triangular.
May be I must stick with FET or MOSFET input to get a reasonnably higher
slew rate (5V/uS min) and low input bias (<100nA)

I just remembered a primitive CMOS output, MOS input opamp. It is only
about half as fast as the TL082, but its inputs and output work to the
negative rail.
http://www.intersil.com/cda/deviceinfo/0,1477,CA3260A,00.html#data

.

Quantcast