Re: Synchronous rectifier
Yes, I once think about adding some latch circuits, but the latch
signal seems must come from the control signal of the main switch in a
buck converter. I hope my chip can work alone, so a external latch
signal is not a good solution. If there are any other solutions...
.
Relevant Pages
- Re: Toggling a latch
... when I press the toggle ... >state due to TOGGLE on its RESET input, and the latch already in the '1' ... >state similarly does not change state with TOGGLE on its RESET input. ... appropriate switch closed. ...
(sci.electronics.design) - Re: 2000 Jetta alarm horn
... entire latch. ... Please call up the local VW dealer and ask availability and price. ... If you disconnect the switch & the horn beeps thats ...
(rec.autos.makers.vw.watercooled) - Re: How to latch a comparator?
... When a switch is momentarily opens I want it's ... circuit to latch OPEN until I press a Reset. ... I figured out how to have a normally closed switch latch a relay Open ...
(sci.electronics.basics) - Re: latching a single transistor
... and switched +12 to the base thru a 330K resistor. ... > emitter is connected back to the base thru the same 330K resistor. ... > Therefore, I reasoned, once the switch is turned on applying +12 to ... > turned off the transistor will stay on (the latch part) since the +12 ...
(sci.electronics.misc) - Re: 100,000 latch issue on Captain Fantastic
... Is the latch tripping when it hits 100,00 and the lamp doesn't turn ... Reset relay switches. ... I would suspect the EOS switch on the 10,000 reel. ... The other part of the switch connects the Gray-White wire to the Green ...
(rec.games.pinball) |
|
