Re: Half Bridge vs Full Bridge

From: Winfield Hill <Winfield_member@xxxxxxxxxxx>
Date: 1 Mar 2006 06:25:15 -0800

toyo22r wrote...

Also I breadboarded a half-bridge circuit driving 2 MOSFETs. The rail
voltage is rectified line from a variac so that i can ramp it up slowly.
The output signal looks good until I reach about 80V. The the signal
appears to saturate and its amplitude stays at about 60V and will not
increase even with increasing rail voltage.

Obviously you're doing something wrong, but with so little
detail in your post we can't give much useful advice.

--
Thanks,
- Win
.

References:
- Half Bridge vs Full Bridge
  - From: toyo22r

Prev by Date: Re: Why be such an ***?
Next by Date: Re: Low power consumption board with memory
Previous by thread: Half Bridge vs Full Bridge
Next by thread: Re: Half Bridge vs Full Bridge
Index(es):
- Date
- Thread