Re: Getting crazy with an AD590
amdx ha scritto:
The Analog Devices pdf shows a series resistor of about
1000 ohms with a 6 volt supply.
Ok, I'll try. Is there some formula to obtain the resistor according to
the supply?
Thanks to all.
.
Relevant Pages
- Re: Lights dim when flipping flippers :(
... a plan of action here. ... continuity on the R2 resistor and there was indeed continuity. ... according to the manual it should have 25 ohms. ...
(rec.games.pinball) - Re: 24 to 12v converter
... A 100k resistor on each side isn't going to ... be affected by a few ohms in parallel. ... As soon as you add an appliance to the equation (effectively a parallel ... we now effectively have a potential divider with 100K at the top and 12 ...
(uk.rec.driving) - Re: Adapting mismatched fuel gauge and sending unit
... gauge to a sending unit with the wrong ohm range? ... and my>> existing sending unit is 10-73. ... to change the resistor value to get a wider range. ... sees 29.6 ohms ...
(rec.autos.tech) - Re: Heathkit clock speaker?
... thru one diode and a resistor and the negative side is connected via ... transistor to ground and the transistor is driven by 4001 IC. ... it's probably a high impedance speaker of some sorts. ... at least 150 ohms and a power rating of at least 0.5W. ...
(sci.electronics.repair) - Re: Totally newbie question
... "about 1.000 ohms" sounds really silly. ... upon this line "...a resistor of about 1.000 ohms should always be ... used in series with the galvanometer in experiments of this kind, ... Clearly the experiment is meant to illustrate chemical energy cells. ...
(sci.electronics.design) |
|
