Re: icl7107 scale factor

Probably i dont't explicate me well.

i have a signal that rise from 0 to 600 mV at max.

I should use the 2v full scale for haven't overflow.

But i've only 3 digit precision.So i'd like to mesure from 0 to 600mv
with all 3 1/2 digit precision.

Example: with 2 volt full scale at 300mV the dyspaly show 0.300 and so
on.I'd like that dyspaly show 300.0.

Probably is not possible

.

Relevant Pages

  • Re: icl7107 scale factor
    ... i have a signal that rise from 0 to 600 mV at max. ... I should use the 2v full scale for haven't overflow. ... with all 3 1/2 digit precision. ...
    (sci.electronics.design)
  • One crime committed every two minutes by British youths
    ... "A report from the Youth Justice Board disclosed that youngsters aged ... "The scale of the problem was highlighted by a 20 per cent rise in the ...
    (uk.legal)
  • Re: One crime committed every two minutes by British youths
    ... "The scale of the problem was highlighted by a 20 per cent rise in the ... number of children convicted for violent offences over the past three ... Ret. ...
    (uk.legal)
  • Re: Any suggestions for HO gradient?
    ... Can anyone suggest the minimum length required to meet a rise of 100mm ... or 4 inches in HO scale. ... http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows ...
    (rec.models.railroad)
  • Re: Damn longer screws ,,
    ... I'm looking at maybe 3/16" rise, ... frek&* allot at the scale of the space ...
    (alt.guitar.amps)