Re: can i build/assemble my own power adapter?

Eli Luong wrote:
I was wondering if I could somehow "find" a better adapter with the
same pinout, since it uses 4 of then, two grounds and one 12V and one
5V line. Just curious what my options are.

http://www.astrodyne.com for a power module that matches the rating plate on your old one, rather than building one from scratch. You may need a new enclosure, and reuse the existing cables.
.

Relevant Pages

  • Re: serial console in current
    ... What is proper freebsd serial cable pinout? ... The cabling for the console port ... Ports labelled 1-16 require RJ45-to-DB9 adapters for hooking the MRV ... use standard CAT5/6 cables. ...
    (freebsd-current)
  • Re: OT: Serial Label Printer
    ... with what would appear to be an 8-pin serial port on board. ... The pinout is unclear, but could be ... standard Apple serial (I have a few other boards this way too, ... The cables themselves I think should be wired ...
    (comp.sys.ibm.ps2.hardware)
  • Re: Lantronix UDS-10 FAQ?
    ... I would like to set up on the black box, but make cables for both. ... has standard RS-232. ... But the 850 has a different pinout. ... one you will use and I can help you - I built one myself for mine. ...
    (comp.sys.atari.8bit)