Re: xilinx impact 6.1 does not see the cable3,xp
- From: "tlbs" <tlbs101@xxxxxxxxxx>
- Date: 25 May 2006 10:20:55 -0700
From: blisca
Even though i built the cable3 following xilinx drawings,i have 5 volts on
cable3 supply,and the lpt1 works with other applications,i still have the
message :"Communications with the cable could not be established.Check cable
connections and cable power source"
Can someone help me?
Thanks
Xilinx has some kind of proprietary marker in their JTAG programming
heads that Impact recognizes. I have found no way around it. For v6.1
you will have to buy a DLC5 or higher (Parallel IV) cable, or one of
the newer USB cables. Sometimes you can find them on E-Bay for about
1/3 the cost of a new one.
Good Luck,
Tom
.
- Follow-Ups:
- R: xilinx impact 6.1 does not see the cable3,xp
- From: blisca
- R: xilinx impact 6.1 does not see the cable3,xp
- References:
- xilinx impact 6.1 does not see the cable3,xp
- From: blisca
- xilinx impact 6.1 does not see the cable3,xp
- Prev by Date: Re: microcontroller programming -- how to begin
- Next by Date: Re: No pain, no pair gain?
- Previous by thread: xilinx impact 6.1 does not see the cable3,xp
- Next by thread: R: xilinx impact 6.1 does not see the cable3,xp
- Index(es):
Relevant Pages
|
