Re: Best place on usenet to ask about PCs
- From: "Glenn Gundlach" <stratus46@xxxxxxxxx>
- Date: 7 Jun 2006 21:13:03 -0700
mrdarrett@xxxxxxxxx wrote:
<snip>
their advent.I expect the order of installation has to be in the order of
softwareAt least WIN98 must be installed first.
Best regards,
Helmut
I had a dual boot with DOS 6.22 and WinXP. The manufacturer
Ifor a video routing switcher does not run correctly with WinXP so
addchanged it to triple boot (added win98se) and did not have to
re-install XP. I used Partition Magic to resize the partitions and
ana 3rd. Win98se went in third and also runs fine.
GG
Wow, DOS 6.22 and Win98SE? Almost makes more sense just to dedicate
older computer for legacy devices. I'm impressed that DOS 6.22could
recognize your newer hardware...PICAXE
I dusted off an ancient NEC '486 laptop from the garage, running
Windows 98... planning on using its serial ports to play with my
microcontroller project. (I have a feeling Windows 2000 won't likeme
talking directly to the serial ports.)
Michael
OK -- do yah one better. The Gigabyte Athlon XP 3200 can access a flash
drive directly from DOS provided the drive was plugged in during boot
up into DOS. Surprised me too when I found it out considering there are
no drivers of any kind in DOS. I was going to transfer DOS files onto a
shared FAT16 partion that is visible to both OSs. I copied the files
onto D: and then could not find them in Win XP. When I checked F: in
Win XP, the files were one the flash drive. Now I have to check if DOS
can access Compact Flash cards.
BTW, Tango schematic and PCB run like HELL on the Athlon 3200.
GG
.
- References:
- Best place on usenet to ask about PCs
- From: Pooh Bear
- Re: Best place on usenet to ask about PCs
- From: Jim Thompson
- Re: Best place on usenet to ask about PCs
- From: Helmut Sennewald
- Re: Best place on usenet to ask about PCs
- From: Glenn Gundlach
- Re: Best place on usenet to ask about PCs
- From: mrdarrett
- Best place on usenet to ask about PCs
- Prev by Date: Re: Best Wireless Mouse??
- Next by Date: Re: TO-220 Failures due to lead bending?
- Previous by thread: Re: Best place on usenet to ask about PCs
- Next by thread: Re: Best place on usenet to ask about PCs
- Index(es):
Relevant Pages
|