Re: Ethernet+FPGA

From: Johnny <jo@xxxxxxx>
Date: Wed, 09 Aug 2006 05:17:34 GMT

In article <591ed2d45lu9uve8ocfk4n2pj5m6udk9h4@xxxxxxx>,
thisemailaddress@xxxxxxxxxxxxxx says...

Thanks Nico,

I already checked opencores before posting this. Despite there is an
Ethernet MAC controller project I wasn't able to find the full
schematic description on how to interface the FPGA I/Os to the LAN
Transformer.

The OpenCores Ethernet MAC connects to a "PHY" through the MII port.
The "PHY" (physical interface) is the one that connects to the magnetics
("LAN Transformer").

So you'll need an FPGA+PHY+Magnetics.

John.
.

Follow-Ups:
- Re: Ethernet+FPGA
  - From: Mario Emmanuel

References:
- Ethernet+FPGA
  - From: Mario Emmanuel

Prev by Date: Re: Skybuck's Universal Code Version 3
Next by Date: Re: New Book of Rules
Previous by thread: Ethernet+FPGA
Next by thread: Re: Ethernet+FPGA
Index(es):
- Date
- Thread

Relevant Pages

ethernet - DP83847 PROBLEM
... I have few questions regarding the DP83847 PHY. ... I need to write an ethernet mac in the fpga to send the packets to the ... and the fpga board, but whatever data i put on the MII interface on the ... TD+- in the oscilloscope. ...
(comp.arch.embedded)
Re: ethernet - DP83847 PROBLEM
... I have few questions regarding the DP83847 PHY. ... I have this PHY on xilinx virtex fpga board. ... I need to write an ethernet mac in the fpga to send the packets to the PC through the PHY. ... when i hardware reset the PHY, the link estabilishes between the PC and the fpga board, but whatever data i put on the MII interface on the TXD, i am not able to see anything when i check the pin TD+- in the oscilloscope. ...
(comp.arch.embedded)