Re: generating sine wave

In message <44d9d9c0$0$14343$626a54ce@xxxxxxxxxxxx>, dated Wed, 9 Aug 2006, Fred Bartoli <fred._canxxxel_this_bartoli@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> writes

You're making the same mistake as Bill.

No, I'm being realistic. Using the LM324 at 1 MHz is the rankest of bad design.

It sure can be done: (but I wont recommend this at all)

This is with no DC supplies to the power pins? Evil!
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
2006 is YMMVI- Your mileage may vary immensely.

John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
.

Relevant Pages

  • Re: When was the SMPS power supply invented?
    ... "John Woodgate" wrote in message ... The associated transformer and filter system are designed ... In the design, it is to ... by Rudy Severns on soft switching techniques, ...
    (sci.electronics.design)
  • Re: Sine to square wave conversion
    ... How did you design in the 3 kHz notch? ... >> Regards, John Woodgate, OOO - Own Opinions Only. ... the sine filter here can instantly be implemented as a ...
    (sci.electronics.design)
  • Re: Sine to square wave conversion
    ... How did you design in the 3 kHz notch? ... >> Regards, John Woodgate, OOO - Own Opinions Only. ... the sine filter here can instantly be implemented as a ...
    (sci.electronics.design)
  • Re: Sine to square wave conversion
    ... > Regards, John Woodgate, OOO - Own Opinions Only. ... Took about 5 minutes to 'design' the filter. ... the sine filter here can instantly be implemented as a ...
    (sci.electronics.design)
  • Re: Audio Transformers are like Monster Cables
    ... In message, dated Sat, 16 Sep 2006, Fred Bartoli writes ... I've never seen a notebook or anything else in audio with a 90 ohm input impedance, ... There is plenty of spare gain in such a set-up, so the transformer losses are very likely quite negligible. ... John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK ...
    (sci.electronics.design)