Re: Level of the DSL pilot tone?

On Fri, 18 Aug 2006 18:58:05 GMT, Joerg
<notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> wrote:

Hello Jim,


In my case it timed out and the manual states that this modem does not
have any IP address to access it :-(

I think the standard default is http://192.168.0.1/


Times out as well :-(

There is a Barricade router in between but since you also have one of
these and if your modem IP address works then I guess my modem really
doesn't have an address. Does that make it homeless?

I misread, http://192.168.0.1/ is the Barricade Router IP address.

You can read YOUR IP address in the System Status section of the
Barricade Router "page".

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
.

Relevant Pages

  • Re: Level of the DSL pilot tone?
    ... these and if your modem IP address works then I guess my modem really ... http://192.168.0.1/ is the Barricade Router IP address. ... But you have an ethernet connection between your router and modem, ...
    (sci.electronics.design)
  • Re: Level of the DSL pilot tone?
    ... I think the standard default is http://192.168.0.1/ ... these and if your modem IP address works then I guess my modem really ... http://192.168.0.1/ is the Barricade Router IP address. ... It's plugged into the WAN port. ...
    (sci.electronics.design)
  • Re: Level of the DSL pilot tone?
    ... these and if your modem IP address works then I guess my modem really ... http://192.168.0.1/ is the Barricade Router IP address. ... But you have an ethernet connection between your router and modem, ... always having the weirdest of the weirdest hardware;) ...
    (sci.electronics.design)
  • Re: Level of the DSL pilot tone?
    ... I think the standard default is http://192.168.0.1/ ... There is a Barricade router in between but since you also have one of these and if your modem IP address works then I guess my modem really doesn't have an address. ... the IP address in the system status is just the one my ISP assigned for a given session. ...
    (sci.electronics.design)
  • Re: Need help reverse engineering a 16-bit CRC.
    ... > I am working with this modem, that the manual states it uses the ... > standard CCITT 16bit CRC, but I cannot get anything to match the ... The last 2 bytes are the CRC. ...
    (sci.crypt)