Re: Nuts for BNC/F connector



On Thu, 14 Sep 2006 17:54:32 +0200, "SioL" <Sio_spam_L@xxxxxxxx>
wrote:

I've been searching for a cheap supplier of nuts,
its the type used in those cheap chassis-mountable BNC
female connector or F connectors.

Surprisingly its not so easy to find them. Need about 1000 pieces.

I've got one supplier only and am looking for possibly cheaper
alternatives.

AMP sells them separately from the BNC connectors - available through
Newark. (I was surprised recently when I ordered some AMP panel/pc
mount BNCs and they came without nuts or washers - nuts and washers
had to be ordered separately, but that wasn't apparent in the Newark
catalog.)


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
.



Relevant Pages

  • Re: Coax Connectors Question
    ... antennas, including HF receivers and Scanners, with multiple antennas. ... a simple plug panel using, I imagine, BNC connectors and coax. ... Any better coax connectors for this kind of patch panel usage in your ... military patch panels. ...
    (rec.radio.amateur.antenna)
  • Re: A word
    ... and we had at least two sources of BNC connectors; ... >good ones needed a real crimper, while the bad ones were meant for ... >toolless installation and were the usual cause of broken segments. ... BNC was, and still is, used for connections between frequency generators, ...
    (alt.sysadmin.recovery)
  • Re: Coax Connectors Question
    ... BNC connectors can be had for as low as 50 cents. ... rg 58c patch cables to radios. ...
    (rec.radio.amateur.antenna)
  • Re: RF antenna cables...revisited
    ... right die set can build a pretty bomb-proof BNC cable. ... Crimps done right are superb BUT there are a lot of 'marginal' crimps out ... impossible to pull the cable out of a correctly crimped BNC. ... They were very impressive for the "F" connectors. ...
    (rec.arts.movies.production.sound)
  • Re: RS-232 receptacle
    ... calls the 9 pin version a DE-9. ... shell size - for standard density, the E shell holds 9 pins, A is 15, ... The connectors are now made by manufacturers in many configurations. ... new newsgroup users info: http://vancouver-webpages.com/nnq ...
    (sci.electronics.design)