Re: CMOS analogues switch capacitance
- From: Robert Baer <robertbaer@xxxxxxxxxxxxx>
- Date: Sun, 15 Oct 2006 04:09:17 GMT
Jim Thompson wrote:
On Sat, 14 Oct 2006 11:28:57 -0400, John Popelish <jpopelish@xxxxxxxx>DEfine "gate capacitance"; i think it is subject to changes over temperature.
wrote:
Joe G (Home) wrote:
Hi All,
I am measuring capacitance in the pF range and I need to switch monitoring inputs.
We can calibrate out any constant capacitance.. However
The 64,000 dollar question is would you expect the input capacitances of the CMOS switch to be constant over tempreature?
The devices I have looked at are the better versions of the CMOS 4053 etc ... a few from NXP (formerly Philips)
http://www.standardics.nxp.com/products/switches/
While there are input capacitance specifications..... there is no spec on the relationship between input capacitance vs Temp.
Would you expect input capacitance to be fairly constant over the operating temp range?
The short answer is that, unless someone has taken great pains to suppress it, everything changes with temperature.
I would use an extra section of switch to measure the capacitance of a switch, and subtract the changes of that that from all the other measurements.
John, _Very_good_suggestion_!
The only relatively constant term would be gate capacitance, ESD and
MOS body diode capacitances will be all over the place with
temperature.
...Jim Thompson
.
- Follow-Ups:
- Re: CMOS analogues switch capacitance
- From: Jim Thompson
- Re: CMOS analogues switch capacitance
- References:
- CMOS analogues switch capacitance
- From: Joe G \(Home\)
- Re: CMOS analogues switch capacitance
- From: John Popelish
- Re: CMOS analogues switch capacitance
- From: Jim Thompson
- CMOS analogues switch capacitance
- Prev by Date: Re: OT: Blair agrees with British Army Chief
- Next by Date: Re: CMOS analogues switch capacitance
- Previous by thread: Re: CMOS analogues switch capacitance
- Next by thread: Re: CMOS analogues switch capacitance
- Index(es):
Relevant Pages
|