Re: 1000V, 10A Barrier Terminal Strip - Do they exist?


Phoebus wrote:
Hello All,

I've been looking for a connector to use on the output of a 10A, 1000V
power supply and would ideally like to use a screw terminal block of
some sort. Problem is 600V is the highest rated voltage I can find
(unless I use something rated in the 10's of kV).

Anyone have any suggestions?

Screw terminals at that voltage, current, and power level may not be a
very good idea.

What happens when you're giving a tour and the nun accidentally brushes
her rosary chain across the terminals?


How about something a little safer ? :)

.

Relevant Pages

  • Re: Connecting To Phone Box ?
    ... copper under the screw terminal of the appropriate screw terminals in the ... Or, is there some kind of connector, or crimp on tab, that should be used ... separate your wiring from the phone companies expensive equipment. ... equipment so it is important that you only hook wires to your side of the ...
    (alt.home.repair)
  • Re: Cat5 max current?
    ... Didi wrote: ... The connector is not a problem, it is only the actual wire that is the ... In this application it will be running into screw terminals, ...
    (comp.arch.embedded)