Re: Need info on TV set
- From: "Phil Allison" <philallison@xxxxxxxxxx>
- Date: Mon, 27 Nov 2006 13:48:20 +1100
"n o s p a m p l e a s e"
Will a TV set bought in Europe work in New Zealand? What parameters
should I compare to establish if the TV set bought in Europe will work
in New Zeland?
** Europe is has many broadcast TV standards in use - it ALL depends on
which country. Your IP address indicates you are posting from Sweden,
which does appear to use the same ( analogue) signal standards as NZ.
However, NZ uses the VHF band from 44 MHz to 238 MHz ( gap from 68 to
174 ) to provide 12 ( analogue) TV channels while many European TVs have
tuners that are UHF only.
See: http://www.videouniversity.com/standard.htm
NZ presently has no free to air *digital* TV signals, but will likely have
them in the next year or two. Then the TV set only has to accept a PAL video
signal from a digital STB in one of the common formats ie, composite,
S-Video or Component Video.)
....... Phil
.
- Follow-Ups:
- Re: Need info on TV set
- From: Spehro Pefhany
- Re: Need info on TV set
- References:
- Need info on TV set
- From: n o s p a m p l e a s e
- Need info on TV set
- Prev by Date: Re: Microvoltage array
- Next by Date: Schematic for linear Current/Voltage regulator
- Previous by thread: Re: Need info on TV set
- Next by thread: Re: Need info on TV set
- Index(es):
Relevant Pages
|
