Initialization and configuration for SSD1906 graphic controller.
- From: "McWired" <mark.mcwired@xxxxxxxxx>
- Date: 2 Dec 2006 19:18:50 -0800
I have a board that controls a 5.6" TFT display. This board has a
SSD1906 graphic controller and a 50pin connector. I have downloaded
the SSD1906 data***, but I can't figure out the initialization
process and how to configure the controller to work with a especific
color resolution. I'm going to attach the board to a 18F452 using
multiplexed data and address bus. The programming is in C18. Speed is
not a concern right now. I just want to start learning how to use LCD
panels.
Thank you.
.
- Prev by Date: Re: Question on Q of toroid coil
- Next by Date: Re: How inaccurate is a 555 or 7555 REALLY?
- Previous by thread: cheaper electronics
- Next by thread: Need help in designing RF CMOS analog subtractor
- Index(es):
