Re: Newbie guide to "Eagle"?

On 12 Dec 2006 16:02:16 GMT, Robert Latest <boblatest@xxxxxxxxx>
wrote:

On 12 Dec 2006 07:00:41 -0800,
rickman <gnuarm@xxxxxxxxx> wrote
in Msg. <1165935641.022758.183880@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

I have used Eagle before and I found it to be very clumsy to learn.

That's because its user interface predates anything resembling modern
GUI standards, but once you get the knack of it it allows you to
work very quickly.

robert


I used to use PADS many years ago, then used Eagle for a few years,
and am now back to PADS again... EAGLE was OK for those few years,
but now that I've gone back to PADS again, I believe that the
developers at Eagle should look at what their competition does.

Eagle could be MUCH better if they'd do some engineering on it.
Having said that, there ARE a couple (few??) things that even Eagle
does better than PADS, I think. Like, the pan and zoom methods.

Eagles BOM capability sucks big time !

boB

.

Relevant Pages

  • Re: Designing for and soldering a tiny BGA
    ... If you need most of the pads, ... Eagle or other available packages. ... able to "do it yourself", then yes, assembly houses are not cheap. ... But one that can do BGAs is no more expensive than others. ...
    (comp.arch.embedded)
  • Re: Designing for and soldering a tiny BGA
    ... If you need most of the pads, ... Eagle or other available packages. ... able to "do it yourself", then yes, assembly houses are not cheap. ... But one that can do BGAs is no more expensive than others. ...
    (comp.arch.embedded)
  • Re: Designing for and soldering a tiny BGA
    ... If you need most of the pads, ... As to the comments by zwsdot about Eagle vs. FreePCB, ... a look at the package, I think you will find very few shortcomings vs. ... Eagle or other available packages. ...
    (comp.arch.embedded)
  • Re: Designing for and soldering a tiny BGA
    ... it is a much better choice than FreePCB for this reason alone. ... course there is no problem creating a footprint for a BGA - simply set ... the free edition of EAGLE is limited to two ... If you need most of the pads, ...
    (comp.arch.embedded)
  • Re: Designing for and soldering a tiny BGA
    ... pair of pads. ... I would rather wire-bond (0.1mm wires) than using such ... a look at the package, I think you will find very few shortcomings vs. ... Eagle or other available packages. ...
    (comp.arch.embedded)