Re: microcontroller circuit help

Ed, could this setup be used with a NiMH battary pack and a smart
charger or is it for acid batteries only.

ehsjr a écrit :

ehsjr wrote:

I should have added a .22uf cap from the input pin of
the 7812 to ground, and a .1 uf from the output pin to
ground. Also, the ~15 V or higher power supply is
an unregulated supply - if you use a regulated supply,
you need > 15 volts, so use one rated 18 volts.

Ed

.

Relevant Pages
Quantcast