Metal - old style Diodes



Before semiconductors were invented we had Diodes for rectification which
were metallic of some sort. Does anybody remember? I am interested if it is
possible to make a Diode from two dissimilar metals. Why? Well folklore has
it that in some rare occasions people have heard radio stations via two
fillings on top of each other in their teeth.
Also, some claim that a house can vibrate to local radio stations due to the
metallic structure. Possible or rubbish?


Tam



--
Posted via a free Usenet account from http://www.teranews.com

.



Relevant Pages

  • Re: Antenna analyzer- no MW?
    ... The problem with low cost analyzers is that they use broadband detector ... Strong local AM radio stations will cause an output from these ... diodes and generate erroneus results. ... a German ham has modified his unit for operation from 40 kHz ...
    (rec.radio.amateur.antenna)
  • Re: That Lowes flashlight, again
    ... I think where you're confused is that you're looking at the AC input power and the full wave rectified power, ... Indeed, with perfect diodes, you'd have 100% efficiency, but you won't have DC yet! ... The ideal diode has a discontinuity in its resistance, changing from infinite to zero when it passes through the forward voltage threshold. ... The only reason to stack 2 or more LEDs in a generator driven application is to improve the efficiency slightly by matching the generator load more closely to its designed load and making the real rectification power a smaller fraction of the load power. ...
    (rec.bicycles.tech)
  • Re: That Lowes flashlight, again
    ... I think where you're confused is that you're looking at the AC input power and the full wave rectified power, ... Indeed, with perfect diodes, you'd have 100% efficiency, but you won't have DC yet! ... LEDs are constant voltage devices. ... The only reason to stack 2 or more LEDs in a generator driven application is to improve the efficiency slightly by matching the generator load more closely to its designed load and making the real rectification power a smaller fraction of the load power. ...
    (rec.bicycles.tech)
  • Re: TECH: WPC General Illumination Very Dim
    ... one leg of the AC feed to the GI, and insert the bridge rectifier, ... through one set of diodes, dropping about a volt in the process. ... connector to J115 ... diode lines in parallel which would result in half wave rectification ...
    (rec.games.pinball)
  • Re: TECH: WPC General Illumination Very Dim
    ... The intention of the original implementation of this mod, ... through one set of diodes, dropping about a volt in the process. ... connector to J115 ... diode lines in parallel which would result in half wave rectification ...
    (rec.games.pinball)

Quantcast