Re: Question regarding using epoxy or RTV on PCBs
- From: "Michael A. Terrell" <mike.terrell@xxxxxxxxxxxxx>
- Date: Sun, 17 Dec 2006 20:23:38 GMT
D from BC wrote:
I just use whatever clear silicone is at the hardware store. I
do smell the acetic acid in silicone.
Did you know you can make copper bright and shiney in vinegar?
Vinegar has acetic acid..
So I wasn't worried too much about home silicone containing some
"Alien" acid that would eat through the floor.
If there are corrosives in the RTV..the reactivity I believe is
limited and reduces to nothing after cure. Some microscopic
copper loss can be tolerated.
I have seen copper traces with opens from the wrong RTV.
--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.
Michael A. Terrell
Central Florida
.
- Follow-Ups:
- Re: Question regarding using epoxy or RTV on PCBs
- From: Eeyore
- Re: Question regarding using epoxy or RTV on PCBs
- References:
- Re: Question regarding using epoxy or RTV on PCBs
- From: Jim Yanik
- Re: Question regarding using epoxy or RTV on PCBs
- From: D from BC
- Re: Question regarding using epoxy or RTV on PCBs
- Prev by Date: Re: how can add antenna be used for both rx and tx, and how can rx and tx be amplified?
- Next by Date: Re: how can add antenna be used for both rx and tx, and how can rx and tx be amplified?
- Previous by thread: Re: Question regarding using epoxy or RTV on PCBs
- Next by thread: Re: Question regarding using epoxy or RTV on PCBs
- Index(es):
Relevant Pages
|