receiving a carrier

Hello All.
I am a beginner, all I need is to build a transmitter that only
transmits a carrier without any modulation and be able to receive this
carrier at the second location.
unfortunaitly, most receiver circuits that are available over the
internet use a different techniques such as superhet, which is not
suitable for my application, I need to receive the carrier only with
the same frquency as I sent it.
please try to help me.
thanks

.

Relevant Pages

  • Re: Digital modulation - In digital domain or analog..?
    ... the bandwidth spreads out to match the modulation. ... < I understand typically a carrier is supposed to be CT signal, ... FM transmitter. ...
    (comp.dsp)
  • Re: Digital modulation - In digital domain or analog..?
    ... the bandwidth spreads out to match the modulation. ... < I understand typically a carrier is supposed to be CT signal, ... FM transmitter. ... Can the modulation be done entirely using DSP ...
    (comp.dsp)
  • Re: How far can you get with QRP, like the Yaesu 817?
    ... carrier suppression then the end result is an interrupted carrier wave. ... Exactly - in a filter type SSB transmitter, ... EME-Moonbounce (which is as it sounds - bouncing signals off the moon to ...
    (uk.radio.amateur)
  • Re: Comm. Circuits - SSB Question
    ... >compensate for the lack of a full carrier in SSB ... There are several methods that can be employed in the transmitter and receiver ... signals is on the frequency on which you want to transmit AND which provides ...
    (sci.electronics.misc)
  • Re: QPSK carrier recovery problems
    ... I thought that blind synchronization method is the simplest way to ... In my solution carrier phase ... with timing in transmitter, so when I recover carrier, I also have ... transmitter is put at the one end of channel, receiver at the other ...
    (comp.dsp)
Loading