Circuit to detect blown fuse

I am looking for a circuit that will detect whether or not a 120v fuse
has blown. I would like a green LED to show the fuse is not blown and a
red LED to show when the fuse has blown. I am new to circuit designs
but I have assembled many circuits in the past.

.

Relevant Pages

  • Re: Microwave problem
    ... I took out the circuit board, ... > over to see if there were any obvious problems, such as another blown ... > fuse, which there weren't. ... > that the transformer was providing electricity to the board, ...
    (sci.electronics.repair)
  • Re: fuse blown up
    ... fuse was blown up in my home. ... If what I did (connecting ni-cr wire directly) was wrong then are ...
    (sci.electronics.design)
  • Re: fuse blown up
    ... fuse was blown up in my home. ... If what I did (connecting ni-cr wire directly) was wrong then are ...
    (sci.electronics.design)
  • Re: Circuit to detect blown fuse
    ... has blown. ... red LED to show when the fuse has blown. ... I am new to circuit designs ... a photo detector circuit to fire up a low voltage circuit ...
    (sci.electronics.design)
  • Re: Circuit to detect blown fuse
    ... has blown. ... red LED to show when the fuse has blown. ... I am new to circuit designs ... Synergetics 3860 West First Street Box 809 Thatcher, ...
    (sci.electronics.design)
Quantcast