Re: 25V H-bridge for <3V logic?

Joerg wrote:

Sure. I am all for unorthodox uses of standard parts but I haven't done
that to an opamp yet. VEE would be on ground, VCC on a variable drive
that goes between zero and 20V. Then the amps would bang to opposite
sides on each zero transition.

Has been working like a charm for 20 years now in my "railroad station"
clock driver using an LM358 at ~30V.

robert
.

Relevant Pages

  • Re: Standing-Wave Current vs Traveling-Wave Current
    ... ensures that it is a distributed network example. ... it is a zero current "point" and not a zero current ... How can the current in the middle of the line be 0.4 amps ... can only conclude that 0.2 amps of traveling wave current ...
    (rec.radio.amateur.antenna)
  • Re: B4R question
    ... The fan doesn't start right away, and amps ... When you turn it on, if it takes a while beofer the DC voltage settles to zero, it's somewhere in the amp, if it settles right to zero, but it still takes 90 seconds to start making sound, it's in the protection circuit. ...
    (alt.guitar.bass)
  • Re: B4R question
    ... The fan doesn't start right away, and amps ... on, if it takes a while beofer the DC voltage settles to zero, it's ... seconds to start making sound, it's in the protection circuit. ...
    (alt.guitar.bass)
  • Re: 25V H-bridge for <3V logic?
    ... VEE would be on ground, VCC on a variable drive that goes between zero and 20V. ... Then the amps would bang to opposite sides on each zero transition. ...
    (sci.electronics.design)
  • Re: Power Consumption
    ... seems to settle down after a minute or two at 25W. ... Volume at either of the amps wasn't high - from zero up to ... Stewart Pinkerton | Music is Art - Audio is Engineering ...
    (uk.rec.audio)