Re: microphone preamp
- From: "alexxx.magni@xxxxxxxxx" <alexxx.magni@xxxxxxxxx>
- Date: 22 Jan 2007 01:33:36 -0800
jasen ha scritto:
On 2007-01-15, alexxx.magni@xxxxxxxxx <alexxx.magni@xxxxxxxxx> wrote:
Hello,
I need to record sound coming from a large space (a room) with a
microphone connected to a PC soundcard. So far the results have been
disappointing, and I've been suggested that I need to preamp the
microphone.
Can you kindly suggest a <VERY SIMPLE> circuit design (I'm a begginer)?
I don't need anything complicated, since I can sustain without problem
reasonable amounts of noise and distortion.
I found this helped with a 600 ohm microphone.
tip ---------+-[4m7]-.
| |
\ |
0.1uF \| | || 2.2uF
|----+-||--------.
|/| || \_ |
/~ BC547 ( )|
| /~ |
sleeve ------+-------------------'
advantages
1 simple
2 draws power from the soundcard
disadvantages
1 performance varies from mediocre to bad
depending on parts and temperature
try differemt resistors 3.3M 3.9M 5.6M etc
.-------------------------------------------------------------.
| This is an ascii schematic, if the diagram appears garbled |
| try switching to a fixed-pitch font (courier works well) |
| pasting it into notepad works well on ms-windows. |
| in google groups selecting 'fixed font' (top right of page) |
| or view source (options) work too. |
`-------------------------------------------------------------'
--
Bye.
Jasen
Hi Jasen - thanks for your help!
One problem only, I'm slightly confused on the diagram (even reading
it at fixed-width):
1) the component labeled 4m7 is a 4.7 mOhm resistence?
2) I see the label 0.1uF but I dont see the condenser in the drawing!
3) the "thing" at the right represents the soundcard?
4) your comment " try differemt resistors 3.3M 3.9M 5.6M etc" meaning
in place of the 4.7 milliOhm?
.... sorry, but as I told before, I'm not exactly a great-master in
electronics!
thanks for your help!
Alessandro
.
- Follow-Ups:
- Re: microphone preamp
- From: jasen
- Re: microphone preamp
- References:
- microphone preamp
- From: alexxx.magni@xxxxxxxxx
- Re: microphone preamp
- From: jasen
- microphone preamp
- Prev by Date: IRDA ENCODER/DECODER BJ8P153AN
- Next by Date: MOSFET dynamic ripple filter for variable supply
- Previous by thread: Re: microphone preamp
- Next by thread: Re: microphone preamp
- Index(es):
Relevant Pages
|