Re: 320pin BGA Pin Layout suggestions

On Mar 19, 4:35 am, "Joe G \(Home\)" <j...@xxxxxxxxxxxxxxx> wrote:
Hi All,

I am looing at laying out 320pin BGA on a PCB like this one.

http://www.standardics.nxp.com/packaging/package.outlines/pdf/sot824-...

The pitch between balls is 0.5mm. The internal cpu speed is 220MHz but the
external I think is ~60MHz.

It has a JTAG port

Questions
Q1
How many PCB layers would you recommend and why

Q2
Is there anything else I should watch out for?

Any other pointers on this beast would be appreciated.

Regards
Joseph

is that the LPC3180 you are using? wonderful chip

.

Relevant Pages

  • Re: 320pin BGA Pin Layout suggestions
    ... I am looing at laying out 320pin BGA on a PCB like this one. ... The pitch between balls is 0.5mm. ... If it's only a single supply and the inner balls are ...
    (sci.electronics.design)
  • 1mm BGA virgin
    ... for me as a birthday present, I'm trying to get my first ever BGA pcb ... Each of the balls is 1mm ... I need to run vias in- ... Is there a PCB manufacturer who can drill tiny vias like this? ...
    (comp.arch.embedded)
  • Re: BGA in PCB
    ... has anyone used PCB to layout boards with BGA footprints? ... like to mount a fine pitch BGA packagae and before I go off ... Lots of folks there have used PCB for this kind of work, ...
    (sci.electronics.cad)
  • WTD: PCB header in 0.07 pitch
    ... I've been looking around for some PCB headers. ... I can buy the 0.1" pitch ... anywhere, and I use them in turned pin, like this: ...
    (sci.electronics.components)
  • 320pin BGA Pin Layout suggestions
    ... I am looing at laying out 320pin BGA on a PCB like this one. ... The pitch between balls is 0.5mm. ...
    (sci.electronics.design)