Re: Wiring LEDs together

Hey all!

Thanks for the reply. These LEDs are for a theatre production. They
have to stay on each night for about 1 minute and theres about 20
performances. If I can power them for 45 minutes on one battery, I'll
be happy.

The LEDs are also installed inside hats, so there's not a lot of room
to place a big lead acid battery. I'd like to stay smaller than around
8 cubic inches or so (they're top hats).

Thanks! Let me know if there's any other info that might be helpful. I
really appreciate your help!

.

Relevant Pages

  • Re: grounding questions
    ... using a single ground that would be fantastic. ... Where theres a will, I want to be in it. ... I have a cold cathode light that runs off 120VAC, i have a inverter ... a handful of volts on the leds, perhaps you could use some of the modern ...
    (sci.electronics.basics)
  • Re: Wiring LEDs together
    ... These LEDs are for a theatre production. ... performances. ... If I can power them for 45 minutes on one battery, ... The LEDs are also installed inside hats, so there's not a lot of room ...
    (sci.electronics.design)
  • Re: Wiring LEDs together
    ... of LEDs that we purchased from a special retailer. ... We have 9 hats and each hat requires somewhere ... I did some research and found these lithium ... 9V batteries at Radios Shack, ...
    (sci.electronics.design)
  • Re: LED efficiency
    ... I.N. Galidakis ---http://ioannis.virtualcomposer2000.com/ ... "There's ALWAYS a mistake somewhere" ... Theres always the Kiloled, 144 LEDs at 1Kw: ...
    (sci.engr.lighting)