Re: Wiring LEDs together
- From: "Werty" <werty@xxxxxxxxxxxxx>
- Date: 30 Mar 2007 22:15:03 -0700
Harbor Fright 18vdc , $10 on special
but get the 1.8ah , not the smaller one .
White LEDs are .02 amps , for highest
eff' . DONT RUN AT .03 amps .
LM431 and some parts to make a flyback
to drive any voltage you need .
Flybacks need low inductance , or the
frequencey is too low .
Start with less than .001 Henry , more than
10 microHen'
I just saw a nice MOSFET to drive it ..
only $.10 each .
PMN45EN , Id=1.8 amps @ Vgs =2.5 v .
about .05 Rds .
BTW , anyone into ARM s/w ?
.
- Follow-Ups:
- Re: Wiring LEDs together
- From: alokw
- Re: Wiring LEDs together
- References:
- Wiring LEDs together
- From: alokw
- Re: Wiring LEDs together
- From: martin griffith
- Re: Wiring LEDs together
- From: miso
- Re: Wiring LEDs together
- From: martin griffith
- Re: Wiring LEDs together
- From: alokw
- Wiring LEDs together
- Prev by Date: Re: Wiring LEDs together
- Next by Date: Re: Power inverter design for a welding machine
- Previous by thread: Re: Wiring LEDs together
- Next by thread: Re: Wiring LEDs together
- Index(es):