Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input

From: mpm <mpmillard@xxxxxxx>
Date: 27 May 2007 15:30:33 -0700

On May 27, 5:45?pm, dahl.lar...@xxxxxxx wrote:

Hi Jan,

A comparator that has enough drive on the output?
May not be the simplest solution, however.
Plus, this suggestion comes well into a Memorial Day 6-pack...

I can't remember the part#, but it was from TI.
LMC7215? (Or whatever your favorite is.)

.

References:
- Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: dahl . larsen
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: Stanislaw Flatto
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: dahl . larsen

Prev by Date: Re: MANUFACTURING SOFTWARE
Next by Date: Re: CD4050AE vs CD4050BE
Previous by thread: Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
Next by thread: Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
Index(es):
- Date
- Thread