Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input

From: Jamie <jamie_ka1lpa_not_valid_after_ka1lpa_@xxxxxxxxxxx>
Date: Mon, 28 May 2007 19:36:41 -0400

dahl.larsen@xxxxxxx wrote:

Any easy way to determine if the LED is being "pulsed", before trying
something else ?

Ole

stick a cap across it and see if it gets brighter.
100 uf sounds good.

--
"I'm never wrong, once i thought i was, but was mistaken"
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5

.

Follow-Ups:
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: dahl . larsen

References:
- Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: dahl . larsen
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: Spehro Pefhany
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: Jan Panteltje
- Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
  - From: dahl . larsen

Prev by Date: Re: (WAY OT): Volunteer Spirit of America?
Next by Date: Re: Serial IR receiver problem
Previous by thread: Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
Next by thread: Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
Index(es):
- Date
- Thread