Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input

Indicator LED was indeed pulsed (which also explains the low power
measurements)
100 uF capacitor in parallel with relay solved problem

Thanks all,
Ole


.

Relevant Pages

  • Re: Problem switching a 5V mini relay from a low power LED (1,2v 2 mA) input
    ... Indicator LED was indeed pulsed (which also explains the low power ... 100 uF capacitor in parallel with relay solved problem ...
    (sci.electronics.basics)
  • Re: Recommended capacitors for AF circuits
    ... on capacitor distortion in the 2002 issues of Electronics World. ... some of the capacitor-distortion measurements I've seen ... for low-frequency signals, where the coupling cutoff is not far ...
    (sci.electronics.design)
  • Re: Capacitance Meter or LCR
    ... > Indeed I'm a chemical engineer and I want to use a special capacitor ... I'm puzzled by your need for a 5kHz sampling rate, ... and take rapid measurements with a vernier- ... interpolation period counter. ...
    (sci.electronics.design)
  • Re: Cpacitance or Dielectric Measuring
    ... >> One of the problems with using a capacitance bridge is that the OP ... >> would like to make 5000 measurements per second, ... >Making the balancing capacitor and the sensing capacitor isothermal ... John Fields ...
    (sci.electronics.design)
  • Re: Measured INDUCTANCE of my welding reactor
    ... >and made several measurements. ... I assumed internal resistance r of my ... >wavetek to be 50 Ohm. ... external capacitor across the inductor's terminals and make the R very large ...
    (sci.electronics.design)